Computer Power Cord

A: Standard computer power cords, nema 5-15p to c13 cables in particular, are widely used with many different devices such as desktop computers, monitors, printers, scanners and even some TVs; they are flexible in terms of what devices they can work for because these types of cords can support a vast array of electronic equipment.

A: The thickness of the wire found in a power cord is what AWG (American Wire Gauge) pertains to. 18 AWG and 14 AWG are typical sizes for computer power cords. In other words, the size of the wire determines how much current can flow through that cable at any given moment; smaller numbers mean thicker wires with larger current capacities while bigger numbers stand for thinner wires with lower current capacities. Mostly, 18AWGs will do for desktop computers and their peripherals but if you have more demanding needs such as those involving higher amperage ratings then it might be necessary to use 14AWGs instead.

A: The length of the power cord you need will rely on how far your PC or device is from the power source. Typically, the standard lengths are 1ft, 10ft, and 15 ft. If you have a desktop or monitor near a power outlet, a 1ft or 3m cable should work fine. However, if you have to stretch it quite a bit more than that, then go with 10ft or even possibly 15 ft cords instead. Just make sure not to get one that’s too short for where it needs to reach; always avoid overextension or straining!

A: Yes, you can use a monitor power cable for your printer if it has a compatible connection type like nema 5-15p to c13. They typically use the same standard computer power cords which means that these two devices are swappable provided that electrical ratings match.

A: At one end of a power cord, that is often used in personal computers, there is a three-pin shroud power connector which has a standard NEMA 5-15P plug; on the other end there is an IEC-320-C13 connector. The term “shroud” in this context refers to the plastic or rubber cap that covers and protects the base of C13 connectors from accidental touching with live parts. Typically found in desktops, monitors and peripherals.

A: A more powerful PC power cord may be needed for high-end gaming desktops, especially those with strong graphic cards and processors that draw a lot of current like those rated at 10a 125v. For example, the standard nema 5-15p to c13 power cord should work well enough in most cases but if you have a gaming PC with high power requirements then it might be worth considering using thicker wires such as those found on a 16AWG or 14AWG cable which will provide better stability and electrical safety.

A: The consumer should find UL listed or TAA compliant power cords for safety and quality. For example, UL (Underwriters Laboratories) listed cords have gone through tests to remove any hazards and conform with particular norms. Meanwhile, the trade agreements act (TAA) compliance shows that it meets certain ethical standards while being manufactured. Therefore, one should always look out for such certifications on new or replacement AC power cables during purchase.

A: Yes, You can make longer your pc power cord by using those extension power cords that are specifically made for this reason. Make sure the extension cord you use supports the connector type (e.g., c13 to c13) and has a proper wire gauge (AWG) to handle the device’s power requirements. Do not forget to consider the total amperage draw so that all of your devices are safe on an extension cable.